Home » architecture

Tag: architecture

BRINC BP Names Market Development Manager – Northeast

New Bethlehem, PA – Geoffrey Sloane, a high-performance building material professional with a background in architecture, historic renovations, green building and the building material industry, has been appointed by BRINC Building Products, Inc., as Market Development Manager – Northeast. 

His most recent position was in Commercial Sales with LaValley Building Supply, a well-known building material supplier with 10 locations in the Northeast.

“BRINC BP is offering comprehensive solutions for forward-thinking design and construction. I’m excited to employ my experience in all phases of the building process to develop the New England market for ThermalBuck.”

 – Geoffrey Sloane, Market Development Manager – NE, BRINC Building Products, Inc.

 

Geoffrey has always been passionate about the building industry, having earned his bachelor’s degree in architecture from Hobart and William Smith Colleges in Geneva, NY., and acting as both designer and general contractor for his own home. His professional knowledge and experience in both the architect and builder roles allows him to understand the challenges that face both sides of the build. Sloane’s work in the building material industry provides him with an extensive knowledge of a wide array of materials, and an understanding of how important it is to consider the relationship between different building materials in the building envelope.

“BRINC BP is offering comprehensive solutions for forward-thinking design and construction. I’m excited to employ my experience in all phases of the building process to develop the New England market for ThermalBuck,” said Sloane.

  

ThermalBuck

ThermalBuck falls into an unusual category of the building material market – there’s nothing quite like it.

Use of exterior insulation on residential and commercial buildings is a growing practice in construction, for its ability to limit thermal bridging.

But it creates a new challenge – now that the insulation extends anywhere from 1.0″ to 6.0″ or more past the sheathing, how do you mount the windows?

Before ThermalBuck, the only option for architects and builders to extend the rough opening was to build a wood buck out of 2 x’s or plywood. Rough openings have always been the weakest spot on any building for air and water infiltration, and “bumping” the window out only makes it more difficult to achieve a good air and water seal. Wood bucks are a challenge to flash, and they can rot, shrink, or warp over time.

“Geoffrey offers a unique balance of knowledge and experience in the building industry. His passion for providing green building solutions to architects and builders is exactly what we were looking for.”

– John Brooks, President, BRINC Building Products, Inc.

Continuous Insulation

The European and Canadian building markets have long recognized the need to build tighter, well-insulated homes. The U.S. building industry is quickly catching up, driven both by the adoption of newer IECC codes, and an increased focus on energy-efficient and high-performance building. 

“Architects and builders are looking for solutions on how continuous insulation affects the window installation,” said Brooks, “ThermalBuck is the ideal solution.” Boise Cascade distributes ThermalBuck in  New England through their Westfield, Massachusetts distribution center. 

“Geoffrey offers a unique balance of knowledge and experience in the building industry. His passion for providing green building solutions to architects and builders is exactly what we were looking for. He’s a great asset to our team, and the ideal fit to manage the growth of ThermalBuck in New England,” said Brooks.

Sloane lives in New Hampshire’s capital region with his wife, Nicole, and their children – Suzie, Peter, and Meredith. Stop by Booth #1037 and meet him in person at the 2019 JLC Live show in Providence March 29th & 30th!  Contact Geoff at gsloane@brincbp.com, or 603.268.4640.

BRINC Building Products, Inc, headquartered in New Bethlehem, PA, is the manufacturer of ThermalBuck, the high performance window buck. ThermalBuck is now available through Boise Cascade and Alpen HPP in the U.S., and via Performance Haus in Canada.

 

BRINC BP to Exhibit in Vermont & Wisconsin

The impact of non-profit organizations that promote energy-efficient building standards is growing. Some of the most successful outreach programs include regional events that bring together architects, builders, and high-performance building material experts facing the same set of climate considerations.

This February, BRINC Building Products will be exhibiting at two notable events in this realm: Better Buildings by Design (Northeast), and Better Buildings: Better Business (Midwest).

 

Better Buildings by Design

When we think of leaders in energy-efficiency and sustainability, we think of Vermont. It’s no surprise Vermont ranks among the top 5 states in the nation for the advancement and support of energy efficiency, and has long maintained a pioneering role among the states in this arena.

The American Council for an Energy-Efficient Economy (ACEEE) credits Vermont’s three energy efficiency utility companies as the driving force for Vermont’s ranking: Vermont Gas Systems, Burlington Electric, and Efficiency Vermont.

“Efficiency Vermont is really keen on helping with the social responsibility of living in Vermont.“

– Jennifer Severidt, Energy Consultant – Residential, Efficiency Vermont 

 

We’ve been fortunate to witness firsthand the effectiveness of Efficiency Vermont on two housing projects. One, the Rutland Innovation Home, and two, the Central Vermont Habitat for Humanity House in Randolph. We look forward to contributing to their Better Buildings by Design event, the region’s leading design and construction conference. 

 

Better Buildings by Design – February 6th & 7th

The Better Buildings by Design conference brings together over 1,000 attendees from all over the Northeast, and more than 60 exhibitors annually to Burlington, Vermont. Affordable Efficiency is a focus of the 2019 Better Buildings by Design event, and attendees will share their successes, failures, and strategies for the future. More than 40 workshops are available for attendees, featuring five learning tracks: Building Systems, Business Support, Commercial, Envelope, and Integrated Design.

BRINC Building Products is proud to be a Bronze Level Sponsor for this year’s event, and will be exhibiting ThermalBuck, the high-performance window buck. For a complete list of exhibitors and more information, check out the event homepage here.

Better Buildings: Better Business – February 14th & 15th

Seventh Wave is the force behind the Better Buildings: Better Business conference in Wisconsin.. Their mission is “To advance economic and environmental sustainability through engineering, education and research”. With offices in Chicago and Madison, this non-profit works with utility programs, offering services such as education, financial incentives, and technical assistance for building owners and design teams to exceed the Illinois energy code standards.

The Better Buildings: Better Business conference will be held February 14th & 15th, in Wisconsin Dells, at the Kalahari Resort and Convention Center. Nearly 60 exhibitors and sponsors focused on advancing the residential building and remodeling industry are part of the two-day event. It also features multiple workshops and keynote speakers, which will focus on advancing the building industry for a clean energy future. Visit seventhwave.org for a full list of exhibitors.

 

 

Want to learn more about energy-efficient organizations in your region? Check out our post, Advancing the Energy Codes, for more information on the six REEOS, or Regional Energy Efficiency Organizations to get started. 

 

 

ThermalBuck to Exhibit at Architecture Boston – ABX 2018

BRINC Building Products, Inc. is proud to announce that we will be exhibiting ThermalBuck at this year’s ABX (Architecture Boston) event in Boston, Massachusetts, November 28th-29th. ABX is widely known in the building industry as the largest design and construction event in the Northeast.

Hosted by the Boston Society of Architects (one of the oldest and largest AIA chapters), ABX has been advancing the green building community in the Northeast for over 150 years. The ABX conference is valued for its regional focus – building relationships and a local network in New England, with shared climate, economics, and politics.

 

 

This year’s two-day event is expected to draw approximately 8,000 attendees from across the Northeast. It offers over 100 educational sessions, and more than 300 exhibitors covering 50 product categories in the building industry. Features like the Open Architecture Collaborative, CE Learning Zone, and the Design Technology Throwdown provide unique opportunities for collaboration with peer networks.

For a full schedule of events, check out abxexpo.com. 

 

ThermalBuck – The Continuous Insulation Solution

ThermalBuck has gotten a great response in the Northeast, as builders in New England are more readily using continuous insulation. “ThermalBuck is the product we desperately needed, but didn’t know about. Fortunately it became available and to our attention just in time! We have used it on every project since, even our office renovation,” Alan Benoit, Principal Architect, CPHC, AIA, Sustainable Design of Vermont. ThermalBuck is widely distributed in the Northeast via Boise Cascade, Westfield, MA, (413) 572- 2995. Please contact your local lumberyard for more information.

 

“ThermalBuck is the product we desperately needed, but didn’t know about. We have used it on every project since, even our office renovation.”

 – Alan Benoit, Principal Architect, CPHC, AIA, Sustainable Design of Vermont, Manchester Center, VT

 

Free Pass for the Exhibit Floor

If you’re a building professional in the New England market, please be our guest on the exhibit floor. Download your FREE PASS, and visit us at BOOTH #824 at ABX on November 28th & 29th.

You’ll see why ThermalBuck is a game-changer in the building material industry, and an ideal solution for energy-efficient architects and builders.

See you in Boston!

 

BRINC Building Products, Inc. to Exhibit ThermalBuck at Greenbuild Nov. 14-15th

The Greenbuild International Conference & Expo is a powerhouse event in the building community, bringing together a diverse community of professionals from all over the world to learn about sustainable building practices, and the latest technologies for the built environment.

BRINC Building Products, Inc. is proud to announce that we will be exhibiting ThermalBuck at this year’s event in Chicago, Illinois on November 14-15th, joining hundreds of building material manufacturers committed to the continuing advancement of sustainability in the building community.

 

Greenbuild is an ideal forum for ThermalBuck, as many architects and builders are looking for building material solutions that help fulfill their mission to design and build more sustainable buildings. “We thought we had maxed out every way to reduce a building’s carbon footprint and then we found out about ThermalBuck. It’s a key high-performance component that is helping us towards achieving our firm’s mission of designing net zero buildings,” Nathan Kipnis, FAIA, LEED BD+C, Kipnis Architecture + Planning, Evanston, IL.

 

“We thought we had maxed out every way to reduce a building’s carbon footprint and then we found out about ThermalBuck. It’s a key high-performance component that is helping us towards achieving our firm’s mission of designing net zero buildings.”

 – Nathan Kipnis, FAIA, LEED BD+C, Kipnis Architecture + Planning, Evanston, IL

 

2018 Greenbuild: Human x Nature

The theme for Greenbuild 2018 is Human by Nature // The Intersection of Humanity & The Built Environment. It’s message conveys that green building benefits all of humanity, by making sustainable environments accessible to everyone. Through this achievement, the natural environment will be protected and preserved for future generations.

Greenbuild began back in Austin, TX in 2002 as a small event with 4,000 attendees, and has since grown into a truly global force to promote sustainability.

The 2018 schedule is comprised of over 200 educational sessions, workshops,  green building tours, and networking opportunities throughout the entire week, kicking off Monday November 12th and ending Saturday, November 17th. The first official day of the show, Wednesday, November 14th, begins with the opening plenary by featuring Amal Clooney, international human rights lawyer and professor. The traditional (and usually sold-out) Greenbuild Celebration, held on day two of the expo, Thursday, November 15th, features locally sourced food, drink, and entertainment by seven-time Grammy Award winning blues legend Buddy Guy.

Not only does Greenbuild offer the highest quality of educational and collaborative opportunities for attendees, it also significantly impacts the local environment where the show is held. The conference encourages sustainable practices and behaviors from attendees and exhibitors alike, proactively pursuing goals of reducing waste and offsetting carbon emissions. To read more about sustainability at Greenbuild, click here.

 

Visit ThermalBuck on the Exhibit Floor

Greenbuild is a special show for us. ThermalBuck was recognized at Greenbuild 2015 by Building Green as one of the “Greenest of the Green” top ten best new products at the show.

If you haven’t experienced Greenbuild in person, we welcome you to be our guest on the trade show floor,  and see for yourself how this event provide unique opportunities for green building professionals to connect and advance the goals of sustainability for our built environment. Get your FREE exhibit floor pass (use promotional code THER0MC300), and visit us at Booth #1103 on November 14th & 15th. You’ll leave Greenbuild 2018 feeling inspired about the future of sustainable building.

ThermalBuck Now Available in The Last Frontier

Fairbanks, AK —  When ABC Inc. building material expert Jeff Pino discovered ThermalBuck, he knew it was just the right product to meet the needs of his customers who build in one of the most extreme climates in the U.S.

“We have two seasons here – Winter, and Construction,” says Pino, Building Materials Sales, ABC Inc. Fairbanks is located in the Alaskan Interior , and it has the most significant temperature changes in the U.S. The temperatures range from 90°F during the summer, and below −50°F in the wintertime. Heating costs can be extraordinarily high, making energy-efficient design an absolute essential. “We build to extreme energy-efficient standards here in Alaska, and we install a lot of high performance windows,” continues Pino, “The climate demands it.”

“We build to extreme energy-efficient standards here in Alaska, and we install a lot of high performance windows – the climate demands it.”

-Jeff Pino, Building Material Sales, ABC Inc., Fairbanks, AK

 

Building in Alaska 

“When it’s building season, and the daylight runs 24 hours a day, we work as much as humanly possible. Products that save us time are essential,”  says Pino. 

“ThermalBuck saves money, it saves time – and the thermal break around the window is critical to prevent condensation. We have a company that we work with that does a lot of retrofits – and it’s perfect for that,” says Pino. “In some cases, it almost pays for itself in the reduction in window size. Dropping that inch overall in the size of the window can save the homeowner money – without sacrificing enough glass to make a difference.”

 

“ThermalBuck saves money, it saves time – we have a company we worth with that does a lot of retrofits – it’s perfect for that.”

-Jeff Pino, Building Material Sales, ABC Inc., Fairbanks, AK

 

The History of ABC

ABC Inc. was formed 1995, as a local Fairbanks company specializing in maintenance-free seamless steel siding. It has since grown into a full service building material supplier and construction company, focused on energy-efficient, high-performing buildings designed to withstand life in the Arctic. It’s Building Energy Efficiency Standard (BEES) certified staff helps to meet the needs of both builders and homeowners to find the most energy efficient building materials on the market. ThermalBuck joins a premium assortment of high performance building materials carried by ABC Inc., including Alpen HPP Windows, Therma-Tru Doors, and Edco steel roofing and siding.

Although ABC Inc. is located in Fairbanks, as any business located in Alaska – they are masters in logistics. ABC Inc. will ship ThermalBuck anywhere in the state – and provide the customer service and support to ensure a good installation.You’ll find the energy-efficient experts at ABC, Inc. at akabc.com.

 

Energy Efficiency is a Necessity for Habitat

Habitat for Humanity’s vision is simple:  A world where everyone has a decent place to live. It’s achieving it that’s the complex part. The team at the Central Vermont Habitat for Humanity (CVHFH) is working hard towards that goal, and an even loftier one – building one of the highest performing Habitat for Humanity homes to date, in Randolph, VT.

 

Energy Efficiency: an Essential Need

Building to higher energy-efficient standards is an important consideration for any building project. But the impact on personal health and well-being can be even more significant when making ends meet is a struggle.

“The fluctuating price of energy goes beyond what our families can afford”, says Bruce Landry, Affiliate Building Chair, Volunteer and Weatherization Technician, CVHFH. “The families we partner with start out with very tight budgets and every dollar counts. An energy-efficient home gives stability in heating costs and utility payments.”

“An energy-efficient home gives stability in heating costs and utility payments.”

– Bruce Landry, Affiliate Building Chair, Central VT Habitat for Humanity

 

Not Their First High Performance Rodeo

The home build in Randolph was designed by architect Neil Husher, of Vermont Architects Collaborative. Neil brought three original designs to the table for consideration, which he modified to suit this specific plot of land, and fine-tuned the energy-efficient features for maximum impact.

Although the CVHFH chapter had completed a passive home build in the past, it wasn’t an option for the Randolph home. For instance, there wasn’t enough southern exposure to provide sufficient solar gain. Differences in the wall construction also make this design a bit simpler – building to passive is more detailed, and takes more time. It wasn’t that the volunteer building crew couldn’t handle the technical details and complexity of a passive house, it just wasn’t the right fit for this project. 

 

The High Performance Building Components

The two-story house features 2′ x 8′ wall construction, and an impressive list of high performance building materials including: Rockwool Safe ‘n Sound batt insulation,  Partel VeraPlus smart membrane, Advantech sheathing, 2.0″ Dow Blue Board Styrofoam XPS insulation, Typar WRB, ThermalBuck high performance window bucks, Pella 350 Series windows, Stego Wrap Vapor Barrier, and an Amvic ICF Foundation.

2.5″ ThermalBuck was selected to extend the mounting point for the windows and doors, insulate the rough openings, and prevent moisture at the rough openings – traditionally a difficult detail of any building envelope. ThermalBuck helps simplify the challenge of mounting the windows with the exterior insulation, and integrating the WRB.

8-1-18-window-detail

 

“ThermalBuck makes it easier to do the high performance seals.”

– Anne Walker, Project Manager, Central VT Habitat for Humanity

Employees of BRINC Building Products, Inc., manufacturer of ThermalBuck, will be volunteering to help the CVHFH chapter with their ThermalBuck installation in September, 2018. Keep informed on the next steps of this high performance home by following ThermalBuck on social media:

 

Energy Efficiency in Vermont: More Accessible than Ever

One of the reasons this build was possible? Because it was in Vermont. Efficiency Vermont, founded in 2000 as the nation’s first energy-efficient utility, provides Vermonters with technical and financial support to improve the energy efficiency of their homes, businesses, and communities.

For Central Vermont Habitat for Humanity, this meant not only a significant refund for achieving an established list of standards, but also personalized help in the support of a consultant, Jennifer Severidt. Jennifer was assigned to the project, and provided not just a few answers, but guidance throughout the entire project, answering specific questions like “What specific heat pump would work best?”

 

“We wouldn’t have been able to attempt this without Efficiency Vermont.”

– Debbie Goodwin, Executive Director, Central Vermont Habitat for Humanity

 

Follow this helpful link to view more information about how to work with Efficiency Vermont to receive energy consultation and eligibility for certification, rebates, and third-party testing at efficiencyvermont.com.

 

Habitat for Humanity

Habitat’s mission Is based on the premise that affordable housing plays an integral role in building abundant, strong, and stable communities. Habitat for Humanity is one of the most recognizable efforts to support sustainable housing not only in the U.S, but internationally. To learn more about the efforts of Central Vermont Habitat for Humanity, and how to find local chapters in your area, follow these links:

Habitat for Humanity is not a giveaway program. They offer partner families a no-interest mortgage for their home. In addition to a down payment and monthly mortgage payments, the homeowners invest hundreds of hours of their own labor (sweat equity) into building their new home. Families selected are those who need simple, decent housing, but who are unable to get a loan through any conventional means. Read more about how a family can apply and be selected here.

 

Training Day: GMP Rutland Innovation Home

We’re proud ThermalBuck is an important component of the most energy-efficient house in Vermont, the Green Mountain Power Rutland Innovation Home.

It’s a one-of-a-kind project: a contest created by a utility company, giving away a brand new home to the winning entry of an essay competition. They’re looking for the right person who can contribute their talents and energy to help revitalize the beautiful town of Rutland, Vermont. And they’ll get to do it while living in a brand new, energy-efficient, mortgage free home. We call that a win-win.

The GMP Rutland Innovation Home Contest serves a dual purpose. One, to highlight the strong job market and redevelopment efforts of this beautiful region in Vermont. And two, to showcase the future of building by using the latest building material technology to build an incredibly energy-efficient house, easily replicated in other regions.

 

“It’s not only just a house that we’re giving away. It’s also a benchmark for what we’re hoping to strive for in the future for how we build homes.”

– Nick Stone, R.K. Miles Building Material Supplier, VT

 

The Home

NBF Architects designed this 1,500 sq. foot traditional New England farmhouse featuring the latest in smart-home technology. High-performance building materials were used to make the home as energy-efficient as possible. Building material supplier R.K. Miles installed their high-performance wall system, the VOAT-Wall (Vapor Open, Air Tight), featuring The Henry Company Blueskin WRB, Rockwool ComfortBoard mineral wool exterior insulation, 3.0″ ThermalBuck insulating window buck, and Marvin Windows & Doors.

The Team

Green Mountain Power, NBF Architects, Naylor & Breen Builders, and the United Way of Rutland County, organized the collaboration. It was made possible with the generous support of R.K.Miles Building Materials Supplier, and nearly 60 manufacturers such as Henry, Rockwool, Tesla, and ThermalBuck, who donated their high-performance materials. The talented crew from Naylor & Breen Builders volunteered their time and manpower to make the house come to life.

The Video – Training Day

Join us as we take you through training the team from Naylor & Breen Builders on the ThermalBuck installation in Rutland, and you’ll learn some tricks and tips to simplify your installation. Then get moving on that contest entry. The deadline is June 18th.

 

Installing Nail Flange Windows: Rockwool Exterior Insulation & Henry Blueskin -GMP Innovation House

 

You can take a video walk through of the house in its final stages by checking out the media coverage it’s received by news networks in Vermont. Follow ThermalBuck on your preferred social media account to follow the progress, and find out who the lucky winner is.

ThermalBuck.BRINC        thermalbuck_windowbuck       @ThermalBuckThermalBuck 

Green Mountain Power is described as an “energy transformation company” providing power and innovative products and services to most of Vermont. Their focus is to help customers use less energy and save money, while meeting their existing energy needs by generating clean, affordable energy. GMP was recently named a Top 10 Innovative Company in Energy. Read more here. 

 

 

BRINC BP to Expand Sales Force in Midwest & Western U.S.

BRINC Building Products, Inc. launched ThermalBuck, the high-performance window buck, in November 2015 at the International Greenbuild Expo in Washington, D.C.

And we’ve been trying to keep up ever since.

Architects and builders recognize the simple solution ThermalBuck presents to the challenge of installing nail flange windows with exterior insulation.

“We are now specifying it on all future projects.
What a time/labor/material savings it is!”

-Alan Benoit, Architect, Sustainable Design of VT

John Brooks, President, BRINC BuildingProducts, Inc

ThermalBuck is a game-changing innovation, that’s been noted by a number of respected media organizations across the building industry.

John Brooks, developer of ThermalBuck, was recognized by Builder Magazine as a HIVE 50 Honoree in the category of Building Technology in the December 2017 issue.

 

The use of high-performance building envelope materials is increasing, and with it the need for talented, passionate salespeople with a strong knowledge of basic building science principles.

 

Sales Positions are Open Across the U.S.

Demand for ThermalBuck is rapidly progressing in the Northwest and Midwest regions, and BRINC BP, Inc. is searching for the right partners to take care of our customers. What we’re looking for:

  • Experience working with architects, builders, and retailers
  • Building envelope focus in existing product lines
  • Passion for building science, and customer service
  • Hands-on approach to education and training
  • Proven sales record for existing accounts
  • Dedicated follow-through during all phases of service

If you’re an established sales representative, looking to bring new building material solutions to your customers, you might be just the right fit to represent ThermalBuck. Please reach out to us at thermalbuck@brincbp.com, and tell us why we need you on our team. You’ll be a part of one of the fastest growing, innovative building envelope products in the residential market.

You haven’t heard of us? You’re the only one. Catch up on our media coverage here.

BRINC Building Products, Inc. is headquartered in New Bethlehem, PA. ThermalBuck is manufactured in North America, and sold in the U.S. and Canada. ThermalBuck comes in 7 different sizes, to match the continuous insulation and/or rainscreen depth, and works with all types of exterior insulation. R-value is 4.4 per inch.   

ThermalBuck to Exhibit at Humid Climate Conference

ThermalBuck joins our high performance partners from Alpen windows to exhibit at the 2018 Humid Climate Conference in Austin, TX, on May 21st – 22nd. We will showcase our joint PHIUS Verified Psi-Installation, featuring the Alpen 925 Zenith Nail Fin window with 2.5″ ThermalBuck.

Hot, humid climates are not what usually comes to mind when talking about passive design. Historically, the focus has been on buildings with heavy heating needs, not cooling. Everything changed with the release of the PHIUS+ 2015 building standard, which forced the building industry to reconsider passive house design as an economically viable option for humid climates.

The Austin, Texas chapter of the PHIUS is a major advocate for building science education and training in humid climates. They recognized the need for an annual event to broaden the reach of their work, and bring together professionals in similar climates for a shared exchange of ideas and learning. The first Humid Climate Conference was held in 2016, and is rapidly becoming a notable event in the building industry.

“Our mission is to advocate for the adoption of the PHIUS+ 2015 standard in the greater Austin, TX area through education, governmental petition, and targeted industry efforts.”

– Passive House Austin (PHAUS), as quoted on passivehouseaustin.org 

 

2018 Humid Climate Conference

This year’s event will be held at the A&T Conference Center in Austin, Texas, and provides the opportunity to earn 8 hours of CEUs, with an impressive lineup of speakers and invaluable networking.

Monday begins with one of the most recognizable names in building science, Joseph Lstiburek, presenting, “Water Molecule & 4th State Moisture, Materials, Enclosure” at 10 am. It ends with sought-after media personality and building science promotor Matt Risinger of Risinger & Co., presenting “Lessons Learned in the Evolution of High Performance Enclosures”.

Tuesday’s lineup features a full day of speakers, and wraps up with an after-party at 5:30 pm. The two-day event features a number of sponsors and exhibiting companies, such as the increasingly popular Building Science Podcast, an outreach of Positive Energy, a residential engineering firm in Austin. For a full list of event sponsors, click here.  

 

ThermalBuck + Alpen HPP

Alpen 925 series fiberglass window with 2.5" ThermalBuck window buck ThermalBuck and Alpen are an ideal fit for architects and builders looking for the optimal way to install high performance nail flange windows with continuous insulation.

Alpen is a pioneer in the glazing industry, known for super-high performance insulated glass and award-winning fiberglass windows. Alpen designs and builds some of the most energy efficient window and door products in the world out of their Niwot, Colorado headquarters. They are the first North American manufacturer of passive house certified windows and doors, and offer superior technical support for their customers. Learn more at visit thinkalpen.com.

Take a look below at this quick Q&A with Alpen behind-the-scenes at one of our first Alpen + ThermalBuck installations, in Orderville, Utah.  

 

High-Performance Window Q & A with Alpen Windows

For more behind the scenes videos from this Alpen window installation, visit thermalbuck.com.

 

For additional information about the Humid Climate Conference and to register for this year’s event, visit humidclimateconference.org. You can also follow the conference updates on instagram. To learn more about Passive House Austin, click here. 

 

ThermalBuck to Exhibit at Better Buildings by Design

When we think of leaders in energy-efficiency and sustainability, we think of Vermont. It’s no surprise Vermont ranks among the top 5 states in the nation for the advancement and support of energy efficiency, and has long maintained a pioneering role among the states in this arena.

The American Council for an Energy-Efficient Economy (ACEEE) credits Vermont’s three energy efficiency utility companies as the driving force for Vermont’s ranking: Vermont Gas Systems, Burlington Electric, and Efficiency Vermont.

“Our statewide and coordinated efforts provide equity, fairness and transparency—ensuring that every Vermonter has access to affordable products and services to lower their energy use.”

– Karen Glitman, Director of Efficiency Vermont, as quoted on vermontbiz.com 

Efficiency Vermont was established in 1999, with the purpose of reducing energy costs and protecting the natural beauty of Vermont’s environment. It offers a number of opportunities for Vermont contractors, distributors, design professionals and homeowners to connect, and work together to save energy – and money.

One of their key initiatives is also the region’s leading design and construction conference, Better Buildings by Design.

 

Better Buildings by Design – February 7th & 8th

ThermalBuck extends, insulates, and flashes the rough opening. Integrated with Henry Blueskin WRB.
We sure get this whole “integrated design” concept. Recent ThermalBuck installation in Manchester Center, VT.

The Better Buildings by Design conference brings together over 1,000 attendees from all over the Northeast, and more than 50 exhibitors to Burlington, Vermont, February 7th & 8th, 2018.

Interactive learning is a focus of the 2018 Better Buildings by Design event, presenting practical information and the latest trends and technologies in the building industry.

Over 40 workshops are available for attendees, featuring five learning tracks: commercial, building systems, lighting, envelope, and healthy homes.

BRINC Building Products is proud to announce that we will be exhibiting ThermalBuck at this sold-out event, joining a select group of exhibitors that range from retailers like Curtis Lumber Co. and 475 Building Performance Supply, to manufactures of energy-efficient products like Roxul, Inc., Siga, and Smart Vent.

 

 

Putting It All Together – Integrated Design

This year’s theme “Putting It All Together – Integrated Design,” emphasizes the focus of the workshop content, and a key strategy of the presenters. Attendees can choose from a wide range of topics that include Integrated Teams, Integrated Project Delivery, and Integrated Design in a variety of scenarios.

Take a look at the full schedule of events, speakers, and listing of exhibitors here.

The opening session kicks off with awards honoring “Efficiency Vermont’s 2018 Best of the Best in Building Performance and Home Performance.” Attendees can view the plans, drawings, and photos of these award-winning homes and commercial buildings throughout the conference.

Wednesday evening, February 7th from 4:45 – 7:00 pm, attendees and exhibitors invite colleagues, clients and subcontractors to a reception in the exhibit hall that is open to the public. The reception features complimentary beverages and hors d’ oeuvres, as well as a cash bar. The exhibit hall will also be open to the public Thursday, February 8th from 1:30 – 3:30 pm.

While the exhibitor opportunities have sold out, you can still make plans to register and attend the conference. Or join us for the public reception Wednesday evening, and get a taste of what Better Buildings by Design is all about. Visit efficiencyvermont.com for more information.

 

The ACEEE published the most recent State Energy Efficiency Scorecard in September, 2017. This report ranks every state in the U.S. for their efforts in energy-efficiency, providing an extremely valuable tool for understanding how states handle and recover from severe weather related events such as hurricanes and flooding. The results guide state-level policymakers in their efforts to build more resilient local communities. To review key findings of this report, visit aceee.org.