Home » JLC Live

Tag: JLC Live

ThermalBuck high-performance window buck with Dap Dynaflex 800 sealant

JLC LIVE Building Clinic to Feature ThermalBuck

It’s time – the countdown begins.

The biggest building show in the Northeast, JLC LIVE  kicks off in downtown Providence, RI March 27th – and this year, exhibitor ThermalBuck joins Rockwool, DuPont, and 3M as part of Bill Robinson’s building clinic, “Managing Moisture in Walls with Continuous Insulation”.

JLC LIVE New England is widely known as the best hands-on construction show in the business. Focused on live product demonstrations and popular building clinics, this show stands out as a great training opportunity for builders who want to fine-tune their building science knowledge and installation techniques.

 

“JLC Live is the one show all year that I can promise you, we won’t miss.”

-John Brooks, President, BRINC Building Products, Inc.

 

Two packed floors of exhibitors await the thousands of builders in attendance, and three days of educational sessions are open to all attendees. “JLC LIVE is the one show all year that I can promise you, we won’t miss,” John Brooks, President, BRINC Building Products, Inc. If you’re not already planning to attend this year’s show, please consider joining us for the show!

Grab your FREE PASS here – just enter promotion code EX235 and be our guest on the exhibit floor. You’ll find ThermalBuck at BOOTH #1037 – check out the floor plan before the show!

 

Building Clinics & Workshops

This is what makes JLC LIVE unique amongst trade shows – everywhere you look, you see action. JLC always has a packed schedule of exhibitor installation demonstrations, building clinics, and educational workshops. It’s truly a “hands-on” show, and that’s what makes it so popular.

This year, we’re proud to announce that ThermalBuck will be a part of nationally recognized trainer and building expert Bill Robinson’s building clinic “Managing Moisture in Walls with Continuous Insulation” held on March 29th & 30th, at 9:30 am on the upper level.

ThermalBuck joins distinguished building material veterans including Rockwool ComfortBoard, DuPont Tyvek, and 3M Corporation to help show builders how to successfully deal with the challenges of installing windows with exterior insulation.

Check out the full event program for a complete listing of clinics, and demonstrations that you won’t want to miss.  You’ll want to catch Fine Homebuilding editorial advisor and well-known builder Mike Guertin for his popular Roofers Workshops, located on the second floor ballroom at JLC. His clinics include Roofing in High Wind Zones, Critical Roof Flashings, and 4 Ways to Shingle a Valley.

 

ThermalBuck at JLC

The 2017 show was our first time at JLC, and it couldn’t have been better. The highlight was when the Journal of Light Construction Senior Editor, Tim Healey, stopped by to shoot a short video to introduce ThermalBuck to readers of JLC who might have missed the show.

“This is one of the coolest new products I’ve seen.”

– Tim Healey, Senior Editor, The Journal of Light Construction, JLC Live 2017

http:/https://youtu.be/hZnUliLdd6o

 

Booth #1037 is where you’ll find ThermalBuck at the 2019 show, on the lower level, right by the Simpson Strong Tie demonstration booth. We’ll demonstrate how ThermalBuck solves many of the common challenges wood window bucks create: potential for moisture damage, shrinking, warping or rotting – all things that challenge the long term operation of windows. Not to mention wood is a thermal bridge, the very kind you’re trying to eliminate by adding continuous insulation in the first place. You’ll be able to compare the flashing steps for wood bucks vs. ThermalBuck, and see how much easier it is to get an airtight, watertight building envelope with ThermalBuck.

 

JLC Networking & Special Events

All work and no play is never a good idea, and plenty of fun is on the schedule. And this year’s JLC is no exception. This Old House has teamed up with JLC to help Rebuild the Trades, and offers several events promote the importance of apprenticeship programs to the future of the building industry. You’ll have the chance to hear from your favorite This Old House personalties such as Charlie Silva and Tom Sweenor, as well as highly-successful builders such as Matt Risinger, of Risinger & Co. 

Check out all of the great networking events here, and don’t miss the Welcome Party Friday night from 5pm – 6pm in the Level 5 JLC LIVE Lounge. These events offer great opportunities for fellow attendees and speakers to connect, build relationships, and celebrate the future of building.

Since the March weather feels a lot like winter, take a few days off of the job site to expand your knowledge and invest in your training and skills in New England. We promise – the payback will be worth it.

 


JLC LIVE presents multiple shows across the U.S.  The signature show is JLC Live New England, held every March on the east coast.  Out west, you’ll want to attend JLC LIVE Northwest, held in December in Portland. The Remodeling Show & Deck Expo features a more intimate format, and is scheduled for Louisville, KY in November 2019.    The official media sponsors of JLC LIVE include The Journal of Light Construction (JLC),  Tools of the Trade, and Remodeling magazine.  

Building a Better Mousetrap: The Development of ThermalBuck

People often look at ThermalBuck and ask, “How did you come up with this idea?”

Like any good idea, it starts with figuring out you’ve got a problem in the first place. And that’s exactly how this whole process began. John Brooks, developer of ThermalBuck, built his family an extremely energy-efficient, well-insulated house. And he was surprised with how frustrating and difficult it was to install the windows.


So you’ve added exterior insulation to a building, and the depth of the insulation extends past the rough opening, where the windows are installed. The question of “What do we do about the windows?” becomes an important consideration – and a real challenge to overcome.

Rough openings have always presented concerns for air & water sealing on any building, and changing the mounting point for the windows makes them even more vulnerable to moisture damage.

High-performance architects and builders have used exterior insulation for years, recognizing the importance of eliminating thermal bridges in the building envelope. Traditionally, most U.S. builders have insulated between the studs, if they decided to use insulation at all.

But the building practices of the past are giving way to innovation.

“If you see a failure on a building, you can pretty much bet that it started with water.”

John Brooks, president, BRINC Building Products, developer of ThermalBuck

More states are adopting IECC energy codes that require continuous insulation, and builders are striving to understand how building science impacts the energy efficiency and quality of their work. Use of exterior insulation in both new construction and renovations is growing significantly, so solving this challenge has become a priority.

Mounting Windows Directly Over Foam

Often builders choose to mount windows and doors right over the exterior insulation, particularly for depths in the .5″ and 1.0″ range. But the nail flange compresses the insulation, creating gaps for air and water to enter. There is also a lack of good support for wide, heavy windows, which can affect the long-term operation of the window. Martin Holliday of Green Building Advisor spoke with Cordell Burton, an installation engineer at Pella Windows, about the issue in 2011.

“You can’t screw through foam sheathing – the foam will compress. You have to have something solid to attach the window to.”

Cordell Burton, Pella, as quoted in Musings of an Energy Nerd, Green Building Advisor, May 2011 

For insulation depths over 1.5″, builders generally built “wood bucks”, made of plywood or dimensional lumber, to extend the mounting point of the window.

The Traditional Wood Buck

While wood solves the problem of extending the mounting point, it creates some new problems of its own in that it often will warp, rot, and shrink.

Wood is a poor insulator, so wood bucks allow air to transfer around each window and door through the rough opening. Cold air is denser than warm air, so in the winter the heated indoor air heads outside, and in the summer, the hot, humid air outdoors moves into the cool air-conditioned interior. This transfer of energy is called thermal bridging, which is what continuous insulation is designed to eliminate in the first place.

 

The Problem with Thermal Bridging

Thermal bridging isn’t just about wasted energy – although a home that’s more expensive to heat and cool and isn’t comfortable is a legitimate problem. But it’s really about water. Builders know if bulk water isn’t managed properly, it can cause extensive damage to a building. But the moisture that forms from condensation also causes issues over time.

Another hidden concern is condensation, which can be a consequence of thermal bridging. When warm air comes into contact with a cold spot on the floor or wall, water vapor in the air cools and collects as droplets on the colder surface. This can result in durability problems, as well as poor indoor air quality,” said Joanna Grab, Senior Sustainability Consultant, Steven Winter Associates.

The more we insulate our buildings, the more important it becomes to reduce the potential for condensation to form – good building sense in any climate.

“Another hidden concern is condensation, which can be a consequence of thermal bridging. This can result in durability problems, as well as poor indoor air quality.

-Joanna Grab, Senior Sustainability Consultant, Steven Winter Associates, as written by Kate Danielsen, High Performance Walls on swinter.com, January 2017

Building a Better Mousetrap: The Process

John Brooks was very familiar with the problems associated with wood bucks. After losing his home in a fire, John built a new home for his family with his own hands. They settled in to make a new start, only to watch as condensation and mold formed around the new windows. Not only did the wood bucks he built cause condensation issues, the flashing process was so difficult that the whole installation process amounted to an exercise in frustration. He began to think there had to be a better way to install windows.

Using his background in construction and his experience in the insulation industry, John began to make prototypes for a product that would be better than a wood buck. It needed to solve multiple problems and still be cost-effective. Here’s the wishlist John had for his new product:

An early attempt at ThermalBuck, EPS without the waterproof coating.
An early attempt at ThermalBuck, EPS without the waterproof coating.
    • Extend the mounting point
    • Prevent the compression of exterior insulation
    • Insulate the rough opening
    • Protect the rough opening from moisture damage
    • Support the window
    • Handle shear & wind loads
    • Provide durability, strength & flexibility
    • Install easily
    • Simplify flashing & integrate with the WRB
    • Maintain the long-term operation of the window.

Anyone who has ever come up with a great idea for a new product will agree that the “eureka” moment doesn’t happen without a long period of not-so-great ideas, that take you back to the drawing board time and time again, testing both your patience – and your determination.

This was no different for John, who spent all of his spare time and most of his money on this project, often struggling not to give up. A chance meeting with some strangers at a restaurant, the desire to build a strong business to help sustain their community, and shared Christian beliefs poured new life into his research. After 4 years of prototypes, trial & error, third-party testing, and an unwavering personal faith, John realized his vision for ThermalBuck as it exists today.

The Innovation: ThermalBuck

ThermalBuck is an L-shaped window buck that goes inside the rough opening, and extends outward to create a flush plane with exterior insulation and/or rainscreens.

ThermalBuck is made of a type XIV high-density EPS, and coated in a waterproof resin. Not only does it have the compressive and shear strength to handle the weight of large, high-performance windows, but it also insulates the rough opening with an R-value of 4.4 per inch to limit thermal bridging around the rough opening.

The High-Performance Future of Building

In 2016, Scott Gibson of Green Building Advisor presented ThermalBuck as “An Alternative to Wood Bucks”, and the building industry took notice.ThermalBuck began to receive widespread media recognition, and garnered a lot of attention at conferences and trade shows, because there was nothing like it – it’s simple to use, and solves a common problem.

“This is an impressive product. Once you see it, you really understand the problem this solves for builders like me.”

-Matt Risinger, Risinger Construction, The Build Show

John met Matt Risinger at the EEBA conference in Dallas, Texas, in 2016. Based in Austin but originally a Pittsburgh native, Matt had a western Pennsylvania connection with John.

Matt is a highly respected builder, educator, and self-proclaimed “building science geek” with over 300,000 followers on his popular YouTube channel, Build with Matt Risinger.

He’s well known for sharing solutions and new products to his thousands of followers – and appreciated for his candor. Risinger took home our tabletop displays to share with his building community and gave ThermalBuck great feedback. John was fortunate to film some videos with Risinger & Co. in Austin, and the building community took notice.

The rest, as they say, is building history.

 

Follow ThermalBuck’s path in the media here.


Want to learn more? We recommend these excellent building science resources: Heat Rises… and Falls – Stack Effect, Air Movement and Heat Flow, Allison Bales, Energy Vanguard. How it Works: Vapor Drive, Rob Yagid, Fine Homebuilding. Plan Ahead to Save Energy – Martin Holladay, Fine Homebuilding. 

 

 

It’s time for JLC LIVE – Get Your Free Pass

ThermalBuck is headed to JLC Live 2018 on March 23rd & 24th at the Rhode Island Convention Center, in downtown Providence.

And we’d like you to be there.

JLC Live New England is widely known as the best hands-on construction show in the business. Focused on live product demonstrations and popular building clinics, this show stands out as a great training opportunity for builders who want to fine-tune their building science knowledge and installation techniques.

 

“JLC Live is the one show all year that I can promise you, we won’t miss.”

-John Brooks, President, BRINC Building Products, Inc.


Two packed floors of exhibitors await the thousands of builders in attendance, and three days of educational sessions open to all attendees. If you’re not already planning to attend this year’s show, we invite you to be our guest.

Register and enter promotion code EX255 to print your FREE PASS to the expo hall

 

ThermalBuck at JLC

The 2017 show was our first time at JLC, and it couldn’t have been better. The highlight was when the Journal of Light Construction Senior Editor, Tim Healey, stopped by to shoot a short video to introduce ThermalBuck to readers of JLC who might have missed the show.

“This is one of the coolest new products I’ve seen.”

– Tim Healey, Senior Editor, The Journal of Light Construction, JLC Live 2017

 

 

Booth #409 is where you’ll find ThermalBuck at the 2018 show, on the upper level, right in front of the BUILDING ENVELOPE clinics. We’ll be focused on how ThermalBuck solves many of the common challenges wood window bucks create:  the potential for moisture damage, shrinking, warping or rotting – all things that challenge the long term operation of windows. Not to mention wood is a thermal bridge, the very kind you’re trying to eliminate by adding continuous insulation in the first place. You’ll be able to compare the flashing steps for wood bucks vs. ThermalBuck, and see how much easier it is to install and flash.

 

Workshops & Clinics

Check out the full event program for a complete listing of clinics, and demonstrations that you won’t want to miss. Add to your to-do list “Moisture Management” through proper window installation and flashing, taught by industry veteran Bill Robinson of Train2Build. You’ll want to catch builder Steve DeMetrick too. He’ll be demonstrating new installation requirements for the “Building Envelope”. His clinics on Detailing Exterior Rigid Insulation, Innies and Outies, and The Basics of High Performance Walls, are sure to be some of the best ones at the show.

 

Networking at JLC Live

All work and no play is never a good idea, and plenty of fun is on the schedule. Check out all of the great networking events, but don’t miss the Welcome Party Friday night from 5pm – 6pm in the Level 5 JLC LIVE Lounge. Meet-ups offer great opportunities for fellow attendees and speakers to connect and relax.

Since the March weather feels a lot like winter, take a few days off of the job site to expand your knowledge and invest in your training and skills in New England. The payback will be worth it.


JLC LIVE presents multiple shows across the U.S.  The signature show is JLC Live New England, held every March on the east coast.  Out west, you’ll want to attend JLC LIVE Northwest, held in December in Portland. The Remodeling Show & Deck Expo features a more intimate format, and is scheduled for Nashville in October 2017.    The official media sponsors of JLC LIVE include The Journal of Light Construction (JLC),  Tools of the Trade, and Remodeling magazine.  

“One of the Coolest New Products” at JLC LIVE

The Journal of Light Construction Senior Editor Roe Osborn stopped by the ThermalBuck booth at the JLC LIVE show in Providence on day two, and the first thing he said was “I couldn’t even get near you guys yesterday!” Needless to say, we liked him right away.

The editorial team of JLC is passionate about sharing the latest in building material technology and installation techniques, and there is no better show in the Northeast to witness the latest innovations than the annual JLC LIVE show in Providence, RI.

 The 2017 show was the biggest to date, keeping JLC LIVE on track as one of the Top 250 Trade Shows in the U.S., with over 7,000 attendees.

JLC chose to feature ThermalBuck in “Seen and Heard at JLC LIVE”, published March 24th at jlconline.com.



“(ThermalBuck) might help solve some of the problems that builders face when adding insulation to the exterior of a home. It’s easy to incorporate into the thermal envelope of a house and thermally breaks the window’s connection.”

– The Journal of Light Construction

 

Take a look at the complete slideshow of innovative new products, where ThermalBuck shares the stage with products from ZipWall, Snap Power, and Zehnder.

Senior Editor Tim Healey stopped by as well to shoot a short video to introduce ThermalBuck to readers of JLC who might have missed the show.  WATCH:

We couldn’t have enjoyed the show more.  Great builders ready to learn and engage, retailers looking to provide the best in products and services to their customers – and valuable sharing of information and education.  Thank you to The Journal of Light Construction for the recognition of ThermalBuck – we couldn’t be prouder to be named “One of the Coolest New Products” @ JLC LIVE.  If you didn’t get to catch ThermalBuck in person, take a look at our installation examples from the show.

See you in 2018!

 

Tyvek WRB Exterior to CI
“One of the coolest new products I’ve seen at JLC Live” – JLC Magazine Editor, Roe Osborne
Tyvek WRB & Dow Rigid Foam
Screws penetrate through ThermalBuck into Sheathing
Head Flashing Detail

JLC LIVE presents multiple shows across the U.S.  The signature show is JLC Live New England, held every March on the east coast.  Out west, you’ll want to attend JLC LIVE Northwest, held in December in Portland. The Remodeling Show & Deck Expo features a more intimate format, and is scheduled for Nashville in October 2017.    The official media sponsors of JLC LIVE include The Journal of Light Construction (JLC),  Tools of the Trade, and Remodeling magazine.  

ThermalBuck Installation Demos @JLC LIVE 2017 – Get Your Free Pass & Join Us!

ThermalBuck is headed to JLC Live 2017 on March 24th & 25th at the Rhode Island Convention Center, in downtown Providence.

And we’d like you to be there too!  

JLC Live New England is widely known as the best hands-on construction show in the business. Focused on live product demonstrations and popular building clinics, this show stands out as a great training arena for builders who want to fine-tune their building science knowledge and installation techniques.

Two packed floors of exhibitors await the thousands of builders in attendance, and three days of educational sessions open to all attendees. Register and enter promotion code 61106 to print your FREE PASS!  

 

ThermalBuck Installation Demonstrations

Don’t miss ThermalBuck’s live installation demonstrations at Booth #117 each day at 10:30, 12:30, and 2:30 pm.  See firsthand how simple and consistent window installations are when using ThermalBuck. It solves many of the common challenges wood window bucks create when coupled with exterior insulation.

 

JLC Exhibit Hall

Check out the full event program for a complete listing of clinics, demonstrations, and events that you won’t want to miss.  Add to your to-do list Moisture Management through proper window installation and flashing, taught by industry veteran Bill Robinson of Train2Build. Builder Peter Heard, of North Country Carpentry and Restoration Inc. will be showcasing new installation requirements for the Building Envelope.

All work and no play is never a good idea, and plenty of fun is on the schedule.The key networking event is the Welcome Party Friday from 5-6pm, sponsored by Andersen Windows & Doors. Several happy hours and meet-ups offer great opportunities for fellow attendees and speakers to connect and relax.

Since the March weather feels a lot like winter, take a few days off of the job site to expand your knowledge and invest in your training and skills in New England. The payback will be worth it.


JLC LIVE presents multiple shows across the U.S.  The signature show is JLC Live New England, held every March on the east coast.  Out west, you’ll want to attend JLC LIVE Northwest, held in December in Portland. The Remodeling Show & Deck Expo features a more intimate format, and is scheduled for Nashville in October 2017.    The official media sponsors of JLC LIVE include The Journal of Light Construction (JLC),  Tools of the Trade, and Remodeling magazine.