Home » fine homebuilding magazine

Tag: fine homebuilding magazine

Fine Homebuilding Magazine September 2019

Fine Homebuilding Experts Weigh In on ThermalBuck

Fine Homebuilding (FHB) magazine has been one of the most widely recognized voices in the building industry since its first printing in 1981, nearly 40 years ago.

What makes Fine Homebuilding such a valuable resource to builders is the quality of the content. Written by builders who are considered experts in the field of homebuilding, the articles focus heavily on the details of homebuilding that most builders will encounter on the job site.

Much has changed about the way we build over the years, and the content is now both a combination of best real-world practices for building, and new technology and building materials.


Windows in Thick Walls

In his article entitled Windows in Thick Walls,”September 2019, FHB, Maine residential design/build contractor Michael Maines explains the challenges of installing windows in thick, highly-insulated walls. He presents detailed illustrations that review 5 typical situations:

 

 

    • One: Recessed windows with extension jambs as exterior trim
    • Two: Recessed windows with traditional casing
    • Three: Recessed windows with shingled returns
    • Four: Windows curbed to the exterior
  • Five: Curbed windows installed with ThermalBuck

 

Maines utilizes his experience building many different types of wall assemblies in the article. His solutions address not only moderately high-performance envelopes in climates 3 and up, they can also be modified to suite warmer climate zones, and the highest performance levels of Passive House building.

 

“Thick, highly insulated walls . . . present some challenges for builders when it comes to installing windows and doors . . . (ThermalBuck) is a great, problem-solving product line.”

 —- Michael Maines, Michael Maines Residential Design + Build, Contributing Editor, Fine Homebuilding

 

Read more at finehomebuilding.com.

 


 

Bucks for Outsulation

Also in the September 2019 issue of FHB was a feature by Senior Editor Patrick McCombe, in the SPEC section, which covers new building materials on the market.

 

“The best solution I’ve seen is ThermalBuck.”

 —- Patrick McCombes, Senior Editor, Fine Homebuilding

 

When it comes to challenge of properly installing and flashing windows and doors in walls with exterior insulation, most experts don’t recommend installation directly over foam. Not only does it compress the foam and leave air gaps, but it also introduces some potential issues for the window. The most commonly known way to address this is to build a wood buck to extend the mounting point for the window. However, adding wood works against the goal of creating a continuous insulation layer on the building envelope.

See why Fine Homebuilding Senior Editor Patrick McCombes says “The best solution I’ve seen is (the) ThermalBuck,” and learn more about its features and benefits at  finehomebuilding.com.


 

For detailed coverage of real-world ThermalBuck installations, visit Installation Stories at thermalbuck.com. For more ThermalBuck coverage in the media, review Media Coverage at thermalbuck.com